Internal Jackshaft
Tamco’s motor mounting kits for internal jackshaft dampers include all components needed for a precise, efficient installation. Internal Jackshaft Single Section configurations include parallel and 90 degree mounting kits. Motor Mounting Kits eliminates guesswork, reduces errors, and ensures smooth motor operation with your Tamco damper.
- Kit Configurations
- Kit Options
- Documents
Determine the required kit number by matching damper profile, actuator model, and mount type. If superscript appears next to the kit number, refer to the footnotes under the tables for more information.
Parallel Actuator Mounting Configuration
| Mount Type | SP | NP1 | WP2 | ||||||
|---|---|---|---|---|---|---|---|---|---|
| EF | AF | NF | EF | AF | NF | EF | AF | NF | |
| Internal Jackshaft – In Duct | N/A | 1B | 1B | N/A | 1B | 1B | N/A | N/A | N/A |
| Internal Jackshaft – Flanged To | N/A | 1B | 1B | N/A | 1B | 1B | N/A | 1B | 1B |
| Internal Jackshaft – Extended Rear Flange | N/A | 1B | 1B | N/A | 1B | 1B | N/A | N/A | N/A |
Kit Notes:
1 – NP model is not available for 1500 Series.
2 – WP model is not available for 9000 BF Series.
4 – For multiple section dampers with an internal jackshaft 90°. If selection calls for 1B, use Kit #3.
A – Single section jackshafts require a special configuration, please consult the factory. No modification needed for multi-section jackshafts.
B – For single section dampers only.
Ensure the correct kit is selected by first identifying the kit number on the Kit Configuration tab. Confirm the appropriate kit number for the specific damper configuration before reviewing available kit options.
Kit Part Numbers
| Kit # | Standard | Moisture Resistant (MR) | Saltwater Resistance |
|---|---|---|---|
| 1 | AL-5001 | AL-5031 | AL-5041 |